Answer : The correct option is, (C) a positive calcium ion and a negative oxygen ion.
Explanation :
Ionic compound : ionic compounds are the compounds which are made up of positively charged cation and the negatively charged anion. The bond form between the cation and anion is known as ionic bond.
For example : NaCl, LiF, NaBr, etc.
In option C, a positive calcium ion combine with a negative oxygen ion to give calcium oxide. So, these two particles can form an ionic bond with each other.
While the other options A, B and D can not form an ionic bond with each other.
Therefore, the correct option is C.
When Mrs. Green describes the physical properties of matter she said that physical properties often concern changes in state. One physical property that does not describe a change in state is
Some physical properties of matter do not involve a change in state. An example is density, which is an intensive property that does not depend on the amount of matter. It remains consistent regardless of the state of the substance.
Explanation:Physical properties of matter are characteristics that can be observed without changing the chemical composition of the substance. These properties can often describe changes in state, such as from a solid to a liquid (melting) or a liquid to a gas (boiling). However, there are also other types of physical properties that do not involve a change in state.
One of these physical properties is density. Density does not involve a change in the state of a substance. It is an intensive property, meaning it does not depend on the amount of matter present. It is determined by the mass of an object divided by its volume, and it remains the same regardless of the quantity of the substance you have.
Therefore, Mrs. Green could have been referring to a property like density when she mentioned a physical property that does not describe a change in state.
Learn more about Physical Properties here:https://brainly.com/question/18327661
#SPJ12
Physical properties are characteristics of matter that don't involve a change in the composition of matter. One example is density, which isn't tied to a change of state. Other physical properties include hardness, color, smell, boiling point, and solubility.
Explanation:When Mrs. Green discusses the physical properties of matter, she is referring to characteristics of matter that are not associated with any change in its chemical composition. Physical properties, such as hardness and boiling point, do not involve a change in the composition of matter, hence they do not correspond to a change of state. An example is the density of a material which remains the same regardless of its state (solid, liquid, or gas). Density is therefore a physical property that does not describe a change in state. Other examples can include color, smell, freezing point, boiling point, and solubility.
Learn more about Physical properties of matter here:https://brainly.com/question/19532631
#SPJ12
Place the items in order from the largest wavelength to the shortest wavelength.
ITEMBANK: Move to Bottom
Blue visible
Gamma radiation
Green visible
Infrared
Microwave
Orange visible
Radio wave
Red visible
Ultraviolet (UV)
Violet visible
X-ray
Yellow visible
The order from longest to shortest wavelength is;
Radio wave (longest wavelength)
Microwave
Infrared
Red visible
Orange visible
Yellow visible
Green visible
Blue visible
Violet visible
Ultraviolet (UV)
X-ray
Gamma radiation (shortest wavelengths)
This is referred to as the electromagnetic spectrum.
The EM radiation types ordered from largest to shortest wavelength are: Radio wave, Microwave, Infrared, Red visible, Orange visible, Yellow visible, Green visible, Blue visible, Violet visible, Ultraviolet (UV), X-ray, and Gamma radiation.
To place the various types of electromagnetic (EM) radiation in order from largest wavelength to shortest wavelength, we'll refer to the relationship between wavelength, frequency, and energy of EM waves. As the wavelength decreases, both the frequency and energy increase. Here's the correct order from largest to shortest wavelength:
Radio waveMicrowaveInfraredRed visibleOrange visibleYellow visibleGreen visibleBlue visibleViolet visibleUltraviolet (UV)X-rayGamma radiationWithin the visible light spectrum, remember ROY G BIV as a mnemonic to order the colors from longest (red) to shortest (violet) wavelengths. Beyond the visible spectrum, infrared radiation has longer wavelengths than visible red light, whereas ultraviolet light, X-rays, and gamma rays have shorter wavelengths than visible violet light.
( 20 points ) Jerri is planning to rebuild the engine of an antique car. She has chosen all the materials she needs including a high quality synthetic oil to reduce friction in the engine. What effect will reducing friction have on the engines performance?
A Reduces friction means reduced efficiency
B Reduces friction means reduced heat transfer
C Reduces friction means increased efficiency
D Reduces friction means increased heat transfer
The option, B. Reduced friction means reduced heat transfer " is correct.
Answer:
Reduces friction means increased efficiency
Explanation:
Friction is known to decrease efficiency in machines. In redesigning the engine if the antique car, and the inclusion of oil to reduce friction in the engine, she aims to improve the efficiency of the engine.
Friction leads to lost work in mechanical systems. Friction accounts for the fact that the efficiency of an engine is never 100% since some of the input work is lost as friction.
Hence decreasing the friction improves the efficiency of the machine.
The elements X and Y combine in different ratios to form four different types of compounds: XY, XY₂, XY₃, and XY₄. Consider that there is enough of each sample to contain 2 g of X, and the mass of X is estimated to be 2 g and the mass of Y is estimated to be 4 g.
Arrange the following ratios in order of their increasing value. (The exercise gives me three tabs to put in order from highest to least. These are in the pic)
Rank from highest to lowest ratio. To rank items as equivalent, overlap them.
I put XY₄ as highest, then XY₃ in the middle, and XY₂ as lowest. Is this order correct? I'm not quite understanding this lesson :// so if i could also get some sort of an explanation, that'd be great!!
Yeah, it would be that order since if XY was a number, you would multiply it by that number 4 total times. So it would be a large number. And then it gets smaller and smaller when it gets to XY2. So yeah you got the order correct.
Elements are species of atoms that are defined and characterized by the number of protons. The multiple proportions of the element from higher to lowest are XY₄, XY₃, and XY₂.
What are elements?Elements have been defined as the atomic species that make the molecule and the compounds by combining chemically through bond formation. They are indivisible particles that cannot be broken further.
When two or more elements chemically links then a compound or molecule is formed like element X and Y combined in various ratios and proportions to form XY, XY₂, XY₃, and XY₄.
The highest ratio of the proportions will be XY₄ as it has one X and four Y elements, followed by XY₃ with one X and three Y. Lastly XY₂ will be the lowest ratio as it has one X and two Y elements.
Therefore, the order is XY₄> XY₃ > XY₂.
Learn more about elements, here:
https://brainly.com/question/13516179
#SPJ2
Which section of ocean floor is near the coastlines of all continents?
neritic zone
open ocean
shallow ocean
intertidal zone
The correct answer is intertidal zone.
The littoral zone or the intertidal zone, also known as the foreshore or the seashore, refers to the area, which is above the water at low tide and below the water at high tide. This zone incorporates different types of habitats, with animals like starfish sea urchin, and various species of coral. This zone is situated close to the coastlines of all the continents.
Answer: shallow ocean
Explanation:
shallow near the coastlines
only one that could make sense
Hydrogen gas can be made by reacting methane (CH4) with high temperature steam: CH4(g) + H2O(g) ---> CO(g) + 3H2(g)
How many hydrogen molecules are produced when 256 grams of methane reacts with steam? Please SHOW WORK so I can understand the concept
CH4(g) + H2O(g) ---> CO(g) + 3H2(g)
mass of methane CH4 = 256g
molar mass of methane,CH4 = C + 4 H = 16.04g/mol
moles of CH4
= mass/Molar mass
= 256/16.04
= 15.96 moles CH4
moles of H2 produced
= 15.96 moles CH4 x 3 moles H2
1 mol CH4
= 47.88 moles H2
number of H2 molecules produced here
= 47.88 moles H2 x 6.022 x 10²³ molecules
1 mole
= 288.335 x 10²³ H2 molecules
= 2.88 x 10²⁵ H2 molecules
2.88 x 10²⁵ H2 molecules are produced when 256g of methane reacts with steam.
What is the systematic name of the following compound?
(1 point)
Li2SO3
Lithium Sulfate
Lithium Sulfite
Lithium (II) Sulfide
Sulfurous Lithium
What method can be used to to completely separate a solution containing alcohol and water?
Answer:
Fractional Distillation
Explanation:
Fractional distillation is a type of separating technique used to separate constituents of a mixture (miscible) with varying boiling points. In fractional distillation, heat is applied to the mixture and the constituent with the least boiling point vaporizes out first, then the one with the next boiling point follows (the jars used to obtain the constituents will be changed at different boiling points) and the one with the highest boiling point is obtained last. Alcohol/ethanol has a boiling point of 78°C while water has a boiling point of 100°C hence after exposure to heat, ethanol evaporates out first (and then cooled outside the distilling flask; in a condenser, so it can be converted back to liquid). Since we have just two constituents in this mixture, only water will be left in the distilling flask at about 85°C.
Which of the following is not an indication of a chemical change?
formation of a precipitate
formation of a gas
the container gets hot
the substance dissolves
Answer: the substance dissolves
Explanation: Chemical change is the change in which chemical composition of the substance changes.
Chemical changes are accompanied by following changes:
a) formation of precipitate
b) release or absorption of energy
c) formation of gas
d) change in color
When a substance dissolves, it only changes its state and thus there is no change in chemical composition.
Answer: Option (d) is the correct answer.
Explanation:
A chemical change is defined as the change that results in the formation of new compounds due to change in chemical composition of reactants.
For example, when any two aqueous solutions chemically react with each other then it results in the formation of an insoluble solid that is known as a precipitate.
Also, a gas is released when two substances chemically react together.
It is known that in an exothermic reaction heat is released. So, when a container gets hot then it means two or more substance have chemically react together due to which an exothermic reaction has taken place.
On the other hand, when no change in chemical composition of reactants occur then it means no chemical change has taken place.
For example, when NaCl is dissolved in water then it dissociates into sodium and chlorine ions.
This means no new compound has formed. As by evaporating water, crystals of NaCl can be formed again.
So, when a substance dissolves in water then it means no chemical change has taken place unless and until a new compound is not formed.
Thus, we can conclude that the substance dissolves is not an indication of a chemical change.
Question 1(Multiple Choice Worth 4 points) (04.05 LC) What is the oxidation number of manganese in MnO41−? +3 +4 +7 +8 Question 2(Multiple Choice Worth 4 points) (04.05 LC) Which of the following reactions could be used to power a battery because of the transfer of electrons? Pb22+ + 2Br− → PbBr CaCl2 + 2NaOH → Ca(OH)2 + 2NaCl KOH + HCl → KCl + H2O Zn + Cu2+ → Zn2+ + Cu Question 3(Multiple Choice Worth 4 points) (04.05 MC) Read the following chemical equation: 2Al + 3Br2 → 2AlBr3 Which statement best identifies and describes the oxidizing agent in the reaction? Al is the oxidizing agent because its oxidation number increases. Al is the oxidizing agent because its oxidation number decreases. Br2 is the oxidizing agent because its oxidation number increases. Br2 is the oxidizing agent because its oxidation number decreases. Question 4(Multiple Choice Worth 4 points) (04.05 MC) In which of the following reactions is chlorine (Cl) oxidized? Br2 + 2Cl− → Cl2 + 2Br− Cl2 + 2e− → 2Cl− 2ClO3− + 12H+ → Cl2 + 6H2O 2Na + Cl2 → 2NaCl Question 5(Multiple Choice Worth 4 points) (04.05 MC) The diagram shows the setup of an experiment. A few observations of the experiment are listed in the table below the diagram. A beaker filled three-fourths with a liquid labeled colorless silver nitrate solution is shown. A small strip is shown inside the beaker. The strip is labeled copper strip. The title of the image is Experimental Setup. Experimental Observations Observation Description 1 Solution turned blue 2 Gray particles were deposited on the edge of the strip Which of the following is the correct explanation for one of the given observations? Observation 2 is a result of nitrate ions moving into the solution. Observation 1 is a result of copper ions moving into the solution. Observation 1 is a result of silver atoms losing one electron. Observation 2 is a result of silver ions losing one electron.
1) Answer is: the oxidation number of manganese in MnO₄⁻ is +7.
Permanganate anion has negative charge 1-.
Oxygen (O) in permanganate anion has oxidation number -2.
x + 4 · (-2) = -1.
x - 8 = -1.
x = +7; oxidation nzmber of manganese.
Oxidation number shows the degree of oxidation of an atom in a chemical compound.
2) Answer is: Zn + Cu2+ → Zn2+ + Cu.
In this chemical reaction, there is transfer of electrons from zinc (Zn) to copper (Cu). Zinc change oxidation number from 0 to +2 (lost electrons) and copper change oxidation number from +2 to 0 (gain electrons).
Oxidation half reaction: Zn⁰ → Zn²⁺ + 2e⁻.
Reduction half reaction: Cu²⁺ + 2e⁻ → Cu⁰.
In other chemical reactions, there is no change of oxidation number of elements.
3) Answer is: Br2 is the oxidizing agent because its oxidation number decreases.
Balanced chemical reaction: 2Al + 3Br₂ → 2AlBr₃.
In this chemical reaction, aluminium change oxidation number from 0 to +3 (lose electrons) and bromine change oxidation number from 0 to -1 (gain electrons, reduced).
Oxidizing agent is a substance that has the ability to oxidize other substances, to cause them to lose electrons.
In oxido-reduction reaction, at least one element lose and one element gain electrons.
4) Answer is: Br2 + 2Cl− → Cl2 + 2Br⁻.
Oxidation is increase of oxidation number.
In this balanced chemical reaction, chlorine change oxidation number from -1 (Cl⁻) to oxidation number 0 (Cl₂).
Oxidation half reaction: 2Cl⁻ → Cl₂⁰ + 2e⁻.
Reduction half reaction: Br₂ + 2e⁻ → 2Br⁻.
In other chemical reactions, chlorine is reduced.
5) Answer is: Observation 1 is a result of copper ions moving into the solution.
The reactivity series is a series of metals from highest to lowest reactivity. Metal higher in the reactivity series will displace another.
Copper (Cu) is higher in activity series than silver (Ag), so copper lose electron and silver gain electrons.
Copper is oxidized (increase of oxidation number) and silver is reduced.
Answer:
There's no one-upping that one so I'll just tell you that they were right on my test :)
Explanation:
you're welcome
Describe how light is emitted from an atom. A) As protons absorb energy they travel from the nucleus through the atom emitting light along the way. B) The light is emitted when energy from sunlight is absorbed by the atom to excite a neutron into a higher level. C) When the nucleus absorbs sunlight, photons are energized and move to a higher energy level and are then released. D) Light is emitted from an atom as an electron falls from an excited state to the ground state releasing a photon.
Answer is: D) Light is emitted from an atom as an electron falls from an excited state to the ground state releasing a photon.
Electrons can jump from one energy level to another, absorbing or emitting electromagnetic radiation with a frequency ν (energy difference of the levels).
When electron jump from higher to lower energy level (shell), it emitting (releasing) energy.
For example, when the electron changes from n=4 (fouth shell) to n=2 (second shell), the photons are emitted.
Albert Einstein (1879-1955) proposed that a beam of light is a collection of discrete wave packets (photons) with energy hν, where h is Planck constant and ν is frequency.
The photons have a characteristic energy proportional to the frequency of the light.
Minimum frequency or the threshold frequency is energy below which no photoelectrons are emitted.
Above the minimum frequency, energy depends on the frequency of the light, not on the intensity of the light.
In an experiment, 0.6mol of chlorine gas, Cl2, is reacted with an excess of hot aqueous sodium hydroxide. One of the products is a compound of sodium, oxygen and chlorine. Which mass of this product is formed?
A 21.3 B 44.7 C 63.9 D 128
Answer: B) 44.7 g
Explanation:
The equation represent the reaction is
Cl2 + 2NaOH → NaCl + NaClO + H2O
The balanced equation shows that every mole of Cl2 reacts to produce mole of NaClO
0.6 mole of Cl2 will produce 0.6 mole of NaClO
n = mass/molar mass
molar mass of NaClO = 74.5 g/mol
the mass of NaClO = n x molar mass = (0.6 mole) (74.5 g/mol) = 44.7 g
How does the equilibrium change with the removal of hydrogen (H2) gas from this equation? 2H2S ⇌ 2H2(g) + S2(g)
A. Equilibrium shifts right to produce more product.
B. Equilibrium shifts left to produce more reactant.
C. Equilibrium shifts right to produce less product.
D. Equilibrium shifts left to produce less reactant.
Answer : The correct option is, (A) Equilibrium shifts right to produce more product.
Explanation :
According to the Le Chatelier's principle, when we are adding or removing the products or reactants from the reaction, the equilibrium will shift towards that side where the less number of molecule.
The given equilibrium reaction is,
[tex]2H_2S\rightleftharpoons 2H_2(g)+S_2(g)[/tex]
In the given reaction, when we are removing the hydrogen gas from the reaction then the equilibrium will shift towards the right side to produce more product.
Hence, the correct option is, (A)
A 1.00 g sample of a hydrogen peroxide (H2O2) solution is placed in an Erlenmeyer flask and diluted with 20 mL of 1 M aqueous sulfuric acid. To this solution is added 0.0200 M KMnO4 solution via a buret, until a pale purple color persists. This requires 22.50 mL of KMnO4 solution. What is the percent by mass of hydrogen peroxide in the original solution? (A) 0.613% (B) 1.53% (C) 3.83% (D) 7.65%
What is the name for the S2- anion?
sulfate ion
sulfide ion
sulfur ion
sulfur (II) ion
Final answer:
The name for the S²⁻ anion is the sulfide ion, which is derived from the stem name of sulfur with the suffix '-ide' added, followed by 'ion'.
Explanation:
The S²⁻ anion is known as the sulfide ion. When sulfur gains two electrons, it forms a negatively charged ion with 18 electrons and 16 protons, resulting in a 2- charge. According to the nomenclature for monatomic anions, the name of the ion is derived from the element's stem name, with the suffix '-ide' added, and then followed by the word 'ion'. Therefore, the name for S²⁻ is 'sulfur' + '-ide ion', which gives us sulfide ion.