Who Tried to take credit for newton's 500 page book on motion?

Answers

Answer 1
That would be Robert Hooke
Answer 2
Robert Hooke would be the one who tried to take the credit

Related Questions

obesity refers to gradual weight gain as a person grows older

Answers

obesity is someone over weight for there age

A closed container is filled with oxygen. the pressure in the container is 335 kpa . what is the pressure in millimeters of mercury?

Answers

2,513 millimetres of mercury
is the correct answer, Comrade

A closed container is filled with oxygen. the pressure in the container is 335 k-pa . The pressure in mili meters of mercury 2,513 millimetres of mercury.

What is pressure?

The force delivered perpendicularly to an object's surface per unit area across which that force is dispersed is known as pressure. In comparison to the surrounding pressure, gauge pressure is the pressure. Pressure is expressed using a variety of units.

Conversion factor is

1 mm of Hg = 133.322 pascals,

So,  335 kpa the pressure in millimeters of mercury is  2,513 millimetres of mercury.

The pressure in mili meters of mercury 2,513 millimetres of mercury.

To learn more about pressure refer to the link:

brainly.com/question/12971272

 #SPJ5

Which of the following is a physical property of wood?

Wood can burn

Wood can rot

Wood does not rust

Wood is softer than coal

Answers

"... softer than coal." is a physical property. The other three are all chemical properties.

Answer:

d is the answer

Explanation:

please help!!!
Which of the following is an example of chemical weathering?

1. Frost wedging
2. Animal activity
3.Oxidation
4. Abrasion

Answers

The answer is #3: Oxidation because oxidation is when a substance reacts with oxygen, which causes the substance to rust.  When a rock contains iron and that iron comes in contact with oxygen, iron oxide is created; this weakens the rock.  

Out of

 Frost wedging  Animal activity  Oxidation; and  Abrasion,

I'd say 3. Oxidation.

What did William Herschel discover that Isaac newton didn't

Answers


... the planet Uranus

... two moons of Uranus:  Titania and Oberon

... two moons of Saturn:   Enceladus and Mimas

... infrared light

... more than two thousand previously unknown galaxies, star clusters, and nebulae

... the prevalence of anti-semitism in 18th Century England

William Herschel discovered the planet Uranus, mapped the structure of the Milky Way, and was the first to detect infrared radiation, all of which were discoveries not made by Isaac Newton.

William Herschel made several significant discoveries that Isaac Newton did not, owing to the advancement of scientific knowledge and technology in Herschel's time. One of Herschel's most noteworthy achievements was the discovery of the planet Uranus in 1781. This discovery was the first identification of a new planet in the modern era and extended the known boundaries of our solar system at the time.

Furthermore, Herschel's contributions to astronomy also include the recognition of the Milky Way's structure. In 1785, using his custom-built large reflecting telescope, he conducted an extensive star count along with his sister Caroline. Through this, he mapped the shape of the Milky Way Galaxy, deducing that it has a disk-like structure with the sun near its central region. Prior to Herschel's observations, the full extent and shape of the galaxy were not understood.

What diameter is the sun by the scale used? a0 mm

Answers

The answer is kilometers.
6gms          thats what I think so yes umm thats it pretty much                                                                          

n order to climb a steep hill on a bicycle, a rider shifts to the lowest gear. The lowest gear has the greatest mechanical advantage because it

Answers

it is not as hard to ride the bicycle in lowest gear because the spring is not pulling on it as hard.

One disadvantage of using a survey to gather data for psychological purposes is the fact that it can be __________.

Answers

Misleading or not answered correctly. Or, not diverse enough. 

One disadvantage of using a survey to gather data for psychological purposes is the fact that it can be subject to response bias.

Social Desirability Bias: Respondents may provide answers that they believe are socially acceptable or desirable rather than their true feelings or behaviors. They may want to present themselves in a positive light, which can lead to inaccurate responses.

Acquiescence Bias: Some individuals have a tendency to agree with statements or questions, regardless of their true beliefs.

Extreme Response Bias: On the other hand, some respondents may consistently choose the most extreme response options (e.g., always selecting "strongly agree" or "strongly disagree") without considering the nuances of the questions.

Non-Response Bias: Not all individuals approached to participate in a survey actually respond. Those who choose not to respond may have different characteristics or perspectives from those who do respond, leading to potential bias in the sample.

Try to know more about psychological:

https://brainly.com/question/31197260

#SPJ12

) the best rebounders in basketball have a vertical leap (that is, the vertical movement of a fixed point on their body) of about 120 cm. (a) what is their initial "launch" speed off the ground? (b) how long are they in the air?

Answers

Let u = the vertical launch speed.

Neglect air resistance, and g = 9.8 m/s².

At the maximum height of h = 120 cm = 1.2 m, the vertical velocity is zero.
Therefore
(u m/s)² - 2*(9.8 m/s²)*(1.2 m) = 0
u² = 23.52 (m/s)²
u = 4.85 m/s

The time to attain maximum height is one half of the travel time.
If t = time to attain maximum height, then
u - gt = 0
4.85 - 9.8t = 0
t = 4.85/9.8 = 0.495 s
Therefore the travel time is 2*0.0495 = 0.99 s

Answers:
(a) 4.85 m/s
(b) 0.99 s
Final answer:

The initial 'launch' speed of a basketball rebounder with a vertical leap of 120 cm is approximately 4.9 m/s. They are in the air for about 1 second, given the symmetry of the jump's ascent and descent.

Explanation:

The best rebounders in basketball who have a vertical leap of 120 cm possess a certain initial launch speed and time in the air. These can be determined using the equations of motion in physics. The equation for the height h in terms of initial speed v, time t, and acceleration due to gravity g (about 9.8 m/s²) is: h = vt - 0.5gt².

(a) Setting h to 1.2 meters (or 120 cm) and t to the time of the peak of the jump (which is when the velocity v becomes 0), we get h = 0.5gt, or v = gt. Plugging in g, we get an initial launch speed off the ground of roughly 4.9 m/s.

(b) To find out how long they are in the air, we recognise that the time to reach the peak and the time to fall back down should be the same, given symmetry. Therefore the total time in air would be 2t, which is also equal to 2v/g. Plugging in the values, we get the athlete is in the air for roughly 1 second.

Learn more about Vertical Leap in Basketball here:

https://brainly.com/question/11701949

#SPJ11

What’s a shield volcano

Answers

i think a colonastopy


Volcanoes come in different shapes, depending on the type of eruption. Shield volcanoes have shallow, sloping sides and are formed by very hot, runny lava that spreads over a wide area. The majority of the volcanoes that happen occur along the cracks in the lithosphere that mark the edges of the tectonic plates.

When the voltage across a steady resistance is doubled, the current?

Answers


I'm actually going ahead in the book (DC Circuits) so this isn't really homework but I figured the tag was appropriate....the name of the chapter is Ohm's Law and Watt's Law.

Problem: Calculate the power dissipated in the load resistor, R, for each of the circuits.Circuit (a): V = 10V; I = 100mA; R = ?; Since I know V and I use formula P = IV: P = IV = (100mA)(10V) = 1 W.

The next question is what I'm not sure about:

Question: What is the power in the circuit (a) above if the voltage is doubled? (Hint: Consider the effect on current).

What I did initially was: P = IV = (100mA)(2V) = 2 W

But then I looked at the answer and it said 4 W, then I looked at the Hint again. Then I remembered in the book early on it said "If the voltage increases across a resistor, current will increase."

So question is: When solving problems I have to increase (or decrease) current (I) every time voltage (V) is increased (decreased) in a problem, right? How about the other way around, when increasing current (I), you need to increase voltage (V). I'm pretty sure that's how they got 4 W, but want to make sure before I head to the next section of the book.

P = IV = (200mA)(2V) = 4 W

According to Ohm's law, if the voltage across a constant resistance is doubled, the current will also double. This relationship holds true as long as the resistance remains unchanged. The key concept here is the direct proportionality of voltage and current, as described by I = V/R.

According to Ohm's law, the current (I) through a conductor between two points is directly proportional to the voltage (V) across the two points and inversely proportional to the resistance (R) of the conductor. The mathematical equation that describes this relationship is I = V/R.

When the voltage across a fixed resistance is doubled, Ohm's law dictates the relationship between voltage and current. If the voltage is increased two-fold while the resistance remains constant, the current will also double. This is because, in the equation I = V/R, if V is multiplied by two, and R remains the same, then I must also be multiplied by two.

Therefore, if a student is faced with the decision to either double the voltage or the resistance with the voltage remaining constant, the best choice to maintain the current flow would be to option (b) double the current, which aligns with Ohm's law. Doubling the resistance would actually halve the current based on the formula.

If the voltage across a circuit is increased four times, the current would also increase four times, assuming the resistance stays the same. Additionally, if the resistance of a circuit is halved, for a fixed amount of voltage such as the 110 V provided by an electric company, this means the current would double, leading to twice as much power dissipation.

You are a scientist trying to develop a technology that can be used to power wrist watches. Which type of electromagnetic wave would be most useful to investigate?

Answers

The most useful would be ultraviolet waves. These are the most common types of waves, since they're part of the radiation that comes from sunlight. In addition, they can be used in a form that would not create too much heat and would be able to be stored in an object as small as a personal watch.

Select the statement that correctly describes how light travels. (2 points) Select one:
a. Light cannot travel in a vacuum because it travels slower when the light source is moving.
b. Light cannot travel in a vacuum because the light source is stationary.
c. The speed of light, traveling in a vacuum, will not change if the light source is moving.
d. Light traveling in a vacuum changes speeds when the light source moves.

Answers

The correct answer is C - The speed of light, traveling in a vacuum, will not change if the light source is moving. 

The correct answer is c

What is the direction of the net force acting on the object at position a? hints what is the direction of the net force acting on the object at position a? upward downward to the left to the right the net force is zero?

Answers

Looking at the position A, we can actually see that velocity vectors connecting position A and its adjacent positions appear to have similar magnitude and in similar direction. Hence the acceleration is zero and similarly, the net force is also zero.

 

Answer:

Net force is zero

The net force acting on the object at position A is zero, option 5 is correct.

In physics, an object's motion is determined by the net force acting upon it. When multiple forces act on an object, they can either cancel each other out or add together to create a resultant force. At position A, if the forces acting on the object are balanced in such a way that the magnitudes and directions of all forces cancel each other out, the net force is zero.

This means that there is no overall acceleration or change in motion, and the object remains in a state of equilibrium. In other words, the forces pushing or pulling in various directions at position A are perfectly balanced, resulting in a net force of zero, option 5 is correct.

To learn more about force follow the link:

https://brainly.com/question/13191643

#SPJ12

The complete question is:

What is the direction of the net force acting on the object at position A?

1. upward

2. downward

3. to the left

4. to the right

5. The net force is zero.

What is energy? differentiate between potential and kinetic energy?

Answers

Nothing at all, maybe ask your school teacher

Energy is the capacity to do work or cause motion, existing as either potential energy, which is stored, or kinetic energy, which is the energy of motion. Potential energy can be elastic, gravitational, or chemical, while kinetic energy is directly involved in movement and changes in motion.

Energy is the capacity to do work or cause motion. It exists in various forms which can be generally categorized into potential energy and kinetic energy. The fundamental difference between these two is that potential energy is stored energy based on an object's position, condition, or composition, whereas kinetic energy is the energy of motion, the energy that an object possesses due to its movement.

In kinetic energy, an object is in motion, like a moving car. In potential energy, the energy is stored, like a stretched spring. For example, a ball thrown in the air has kinetic energy when moving upward and potential energy at the highest point of its trajectory.

Potential energy can be further differentiated into various types, such as elastic potential energy found in stretched or compressed springs and rubber bands, gravitational potential energy which is due to an object's position relative to Earth or another celestial body, and chemical potential energy which is stored in chemical bonds and released during chemical reactions.

Kinetic energy is expressed as [tex]KE = \frac{1}{2} mv^2[/tex], where 'm' stands for mass and 'v' for velocity. Examples of kinetic energy include the movement of machinery, electricity flow, wind, and water currents. It's the active form of energy, that is directly involved in causing changes and creating motion.

When an object's potential energy is converted into kinetic energy, it begins to move and work is done. This occurs without the creation or destruction of energy, adhering to the law of conservation of energy or the first law of thermodynamics.

4. You bought a block of cheddar from the grocery store. If you cut a small piece and a large piece from the same block of cheese, will they have the same density?

Answers

Yes, they will have the same density but will just have a different size or mass.

Answer: They will have same density

Explanation:

Density is defined as the mass contained per unit volume.

[tex]Density=\frac{mass}{Volume}[/tex]

Density is characteristic of a compound and thus remains constant at fixed temperatures.

A small piece would have lesser amount and will occupy a smaller volume. Similarly a larger piece would have larger amount and will occupy a larger volume.

Thus the ratio of mass and volume will remain fixed or constant and the density will be same for smaller and larger piece.

What is the difference between a transverse and a longitudinal wave?

Answers

Transverse Waves: Displacement of the medium is perpendicular to the direction of propagation of the wave.

To understand this it is good to think of a rope being held still by person B and being moved up and down by person A. The direction of propagation is from person A to B, so you will see the waves move along this way. But the displacement will be up and down.

Can travel in solids, but not in liquids and gas.

Electromagnetic radiation



AnswersPhysicsGCSE What is the difference between Transverse and Longitudinal waves? 2 years ago 42432 views 0

Transverse Waves: Displacement of the medium is perpendicular to the direction of propagation of the wave.

To understand this it is good to think of a rope being held still by person B and being moved up and down by person A. The direction of propagation is from person A to B, so you will see the waves move along this way. But the displacement will be up and down.

Can travel in solids, but not in liquids and gas.

eg. Electromagnetic radiation

Longitudinal Waves: Displacement of the medium is parallel to the direction of propagation of the wave.

A good example for this is a slinky being pushed along the table, the propagation will be along the table and so will the displacement of all the 'rings'.

Can travel through all states of matter.

Sound waves




Mechanical (sound) waves are unable to travel through a vacuum, such as through space, but radio waves are transmitted to earth from satellites. how is this possible?
a.radio waves are electromagnetic waves.
b.satellites are located within our atmosphere.
c.radio waves are very high energy mechanical waves.
d.radio waves are changed to gamma rays for transmission.

Answers

radio waves are electromagnetic waves
A)Radio waves are electromagnetic waves.
k12 student!

A person struggles very hard to lift a large boulder. He puts in so much effort, he starts to sweat, his heart rate increases, and he gets really tired. All of his effort is for nothing, the boulder does not move at all. In this situation, has work been done? Explain!


*Use the scientific definition of "work" to answer this question.

Answers

No, he did not perform any work. Work is when you’re using energy which results in a force. Even though he was tired and sweaty, he did not move the boulder. So therefore he did not perform any work.

A 1.28×103 kg car accelerates uniformly from rest to 11.7 m/s in 2.93 s. what is the work done on the car in this time interval?

Answers

multiply everything 1,28x103 then 117x2.93

To solve this we must be knowing each and every concept related to work and its calculation. Therefore, 439,805 Joules is the work done on the car in this time interval.

What is work?

Work in physics is the energy delivered to or out of an item by applying force across a displacement. It is frequently expressed in its most basic form as the combination of displacement and force.

When a force is applied, it is said to produce positive work if it has a proportion in the orientation of the movement of a site of application. Work done is positive when the direction of force acting on the object and displacement of the object both are in the same direction.  

Mathematically,    

acceleration=(V-Vo)/t

                   = (12.4-0)/3.77

                  = 3.29 m/s^2

d = 0.5×3.29×(3.77)² = 23.37 m

Work = F×d

         = (m×g) ×d

         =(1920*9.8)23.37

          = 439,805 Joules.

Therefore, 439,805 Joules is the work done on the car in this time interval.

To learn more about work, here:  

brainly.com/question/18094932

#SPJ5

What is vigorous activity?



A any activity or exercise performed most days of the week, preferably daily


B any activity or exercise that ranges in intensity from heavy-to-maximum exertion


C any activity that ranges in intensity from light-to-borderline-exertion

Answers

A. any activity or excersize performed most days of the week,.preferably daily

Any activity or exercise that ranges in intensity from heavy-to-maximum exertion is vigorous activity.

What is vigorous activity?

Vigorous activities require the highest amount of oxygen consumption to complete the activity.

Exercise that is performed with a lot of effort, also known as vigorous exercise or high-intensity exercise, causes a markedly elevated heart rate and fast breathing. Exertion is regarded severe to extremely hard with this activity, making it challenging to speak in complete sentences. Activities like singles tennis, cycling, and running are typically categorized as vigorous.

Hence vigorous activity is any activity or exercise that ranges in intensity from heavy-to-maximum exertion. So, option (B) is correct.

Learn more about vigorous activity here:

https://brainly.com/question/2426221

"what is the important measure from weather radar that gives the intensity of the precipitation?"

Answers

the most important measure is awhips

The measure that gives the intensity of precipitation from the weather radar is the  rate of dispersion of the microwave energy pulses returning back to the radar .

There are three main ways of measuring intensity of precipitation and they are

Precipitation/rain gauge Ground based weather radar Earth-observing satellites

For the purpose of your question the weather radar been discussed is the ground based weather radar.

A weather radar is an equipment used for the predetermination of precipitation in a region. it performs this function by sending out microwave energy pulses via tube transmitter into the atmosphere( air ) to detect the possibility of precipitation.

Hence The important measure of the weather radar that helps determine the intensity of the precipitation is; rate of dispersion of the microwave energy pulses sent out to the atmosphere.

learn more : https://brainly.com/question/17950615

A force does +190 j of work when it acts on a moving object and its direction is in the same direction as the object's displacement. how much work does this force do when the angle between it and the object's displacement is 56°? (assume the displacement is the same.)

Answers

To find the amount of work done by a force acting on a moving object, we can use this simple equation: W = F * d * cos(theta) W is Work F is the force d is the distance the object moves theta is the angle between the force vector and the direction of motion We know that (F * d) is 190 joules. We can find the work done when the angle is 56°. W = F * d * cos(theta) W = (190 J) * cos(56°) W = 106 J At an angle of 56°, the work done by the force is 106 joules.

Use the table below to identify four substances that undergo a physical change if the temperature is reduced from 50oc to -50oc. what is the physical change that takes place in each case.

Answers

the correct answer is b or d

Pls help!!! Quick question!!!

Which of the following is a difference between rotation and translation?

A. Rotation has a reference point, while translation does not.
B. Translation has a reference point, while translation does not.
C. A rotation body moves around an internal or external axis, but a translating body does not.
D. A translation body moves around an external axis, but a rotating body moves around an internal axis.

Answers

D a translation body moves around an external axis,

When gas or liquid particles become more spread out over time what is that called?

Answers

When gas or liquid particles become more spread out over time it is known as diffusion. Diffusion happens when particles can move freely and happens similarly both for gases as well as particles that are dissolved in a solution.

An aircraft engine takes in 9000 j of heat and discards 6400 j each cycle. (a) what is the mechanical work output of the engine during one cycle? (b) what is the thermal efficiency of the engine?

Answers

work done = heat in - heat out 
= 9000 -6400 = 3600 J per cycle. 

And the efficiency = work out / heat in 
= 3600/9000 
= 0.4 or 40%

Sorry if this does not help.

a. The mechanical work output of the engine during one cycle is 2600 Joules.

b. The thermal efficiency of the engine is equal to 28.89%.

Given the following data:

Heat input = 9000 JoulesHeat output = 6400 Joules

a. To determine the mechanical work output of the engine during one cycle:

Mathematically, the mechanical work output of an engine during one cycle is given by the formula:

[tex]Work = H_{in}- H_{out}\\\\Work = 9000-6400[/tex]

Work output = 2600 Joules

b. To determine the thermal efficiency of the engine:

[tex]Th_{E} =\frac{Work}{H_{in}} \times 100\\\\Th_{E} =\frac{2600}{9000} \times 100\\\\Th_{E} =0.2889 \times 100[/tex]

Thermal efficiency = 28.89%

Read more: https://brainly.com/question/22599382

A(n) __________ is a fast-flowing river of air at the boundary between the troposphere and stratosphere.

Answers

This is the jet stream. This air current flows from west to east along a typically-meandering path that is often used as a predictor of weather conditions. These currents are typically formed from the fact that the equator is warmer than the poles, and this allows the different-density air masses to develop an eastward-moving component.

The record of an earthquake obtained from a seismic instrument is a(n) ________.

Answers

The record of an earthquake obtained from a seismic instrument is a 
SEISMOGRAM 

Answer:

Explanation:

It’s a SESMOGRAPH

Which heat transfer method is used to capture the sun's energy?

Answers

radiation because solar panels trap the suns energy which is known as radiation
Other Questions
How does normal gene expression differ from epigenetic effects on the genome? What commandment does this decree now allow European knights to ignore? How does lincoln's connection to liberty make him heroic? A cold front moved in last weekend. In 8 hours overnight the temperature outside dropped 24 degrees. What was the average temperature change for each hour? Which of these uses the principle of superposition of rocks to compare the age of fossils? A. Carbon half-life B. Radioactive dating C. Relative dating D. Uranium half-life BRAINLIEST TO BEST ANSWER!!!!The table shows a linear function. Write an equation that represents the function using function notation. Connect in Justin's school, 0.825 of the students participate in a school sport. If there are thousand students in Justin school, how many participate in a school sport? The reformers of the Anglican Church came to be called how did the forms of resistance to slavery Human facial discrimination in horses: can they tell us apart? If the number 659983 is rounded to the nearest hundred how many zeros does the rounded number have The number 0.4 can written as 4/10, so it is a rational number In your opinion, is SHe's Wearing a Dead Bird on Her Head! about fashion ? Why (not) ? What drug has been used since the 17th century and is now used in combination with other drugs to treat malaria? the length of a rectangle is 3 ft longer than its width if the perimeter of the rectangle is 26 feet find its area Which part of a person's eyes are photoreceptors that help her see the path in front and the trees around her when she is walking in the woods at night? the lens the cones the rods the pupils? please help ASAP!!!Fill in the truth table below for the disjunction p q. Type T for true or F for false.pqp qTT a0TF a1FT a2FF a3 Trade journals, industry-related publications, government statistics, and competitors' web sites are examples of ________ research. What was one of Booker T. Washingtons important achievements? WHO EVER THAT CAN ANSWER THIS GETS 17 POINTS 1. Research how cars or planes have been designed to have less mass.2. How is the balance between strength and mass resolved when designing cars or planes? Steam Workshop Downloader