Your heart has four valves. Normally, these valves open to let blood flow through your heart, and then shut to keep it from flowing backward. Sometimes the valves don't work properly, causing some or all of the following disorders. In regurgitation, blood leaks back through the valve in the wrong direction. In valve prolapse, the valves have "floppy" flaps and don't close tightly. It's one of the most common heart valve conditions. Sometimes it causes regurgitation. In stenosis, the valve doesn't open enough and blocks blood flow. Based on your knowledge of the heart, explain how regurgitation, valve prolapse, and stenosis each adversely affects blood flow and the oxygenation of body tissues.

Answers

Answer 1

Answer:

It influences blood flow

Answer 2

Answer:

A prolapse is when the valve flaps bulges into the left atrium causing a leak. A prolapse can cause regurgitation. This is when the blood flow is backwards. Stenosis is when the aortic valve is narrowed. This blocks the oxygenated blood flow to the body.  

All of these problems effects a proper blood flow and if the flow isn't correct then body tissues that need oxygenated blood won't receive it properly.


Related Questions

The Mass number of an element is the?
A. number of protons plus electrons
B.number of protons only
C. number of protons plus neutrons

Answers

Answer:

The mass number of an element is the number of protons plus neutrons.

Explanation:

The mass number of an element is the number of protons plus neutrons, so the correct answer is the option C.

The mass number of an element is the sum of the number of protons plus neutrons.

Answer: Option C

Explanation:

The element's mass number refers to the summative number of neutron and proton in the nucleus. In the nucleus there is the total number of protons and neutron, summed together to form the atomic mass.

Atomic mass is similar as the mass number in representation. Therefore, we have the following formula for the mass number,

Mass number of an element=Number of protons+Number of neutrons

Which is an important step in how an electric motor uses magnetic force to produce motion?
A) As the north pole of the electromagnet nears the north pole of the permanent magnet, the current reverses and the poles of the magnets then attract.
B) As the north pole of the electromagnet nears the south pole of the permanent magnet, the current reverses and the poles of the magnets then repel.
C) As the north pole of the electromagnet nears the north pole of the permanent magnet, the current reverses and the poles of the magnets then repel.
D) As the north pole of the electromagnet nears the south pole of the permanent magnet, the current reverses and the poles of the magnets then attract.

Answers

Answer:B.As the north pole of the electromagnet nears the south pole of the permanent magnet, the current reverses and the poles of the magnets then repel.

Explanation:

Answer:

B) As the north pole of the electromagnet nears the south pole of the permanent magnet, the current reverses and the poles of the magnets then repel.

Explanation:

As we know that electric motor is based on the concept of torque due to magnetic field on current carrying coil.

Here as the current is passing through the coil the torque on the coil is given as

[tex]\tau = NiAB sin\theta[/tex]

so here the magnetic field due to coil will continuously repelling the current carrying coil as it will move between the magnetic field so direction of current in the coil will change continuously so that it will always repel by the magnetic field and continuously rotated between the magnets

A car travels 300 meters in 15 seconds. What is
the average velocity of the car?
A.
5.0 m/sec
B.
15 m/sec
C.
20 m/sec
D. 30 m/sec

Answers

C; to get the unit rate or the time it travels per second you divide the total amount traveled by the amount it took to travel. 300/15=20 20•15=300

The average velocity of the car is: C.  20 m/sec.

Given the following data:

Distance traveled = 300 meters.Time = 15 seconds.

To find the average velocity of the car:

Mathematically, average velocity is calculated by using the formula;

[tex]Average \; velocity = \frac{Total \; distance}{Total \; time}[/tex]

Substituting the given parameters into the formula, we have;

[tex]Average \; velocity = \frac{300}{15}[/tex]

Average velocity = 20 meters per seconds.

Therefore, the average velocity of the car is 20 meters per seconds.

Read more: https://brainly.com/question/17303336

the ability of an organism to maintain a stable internal environment even when the external environment changes ​

Answers

Answer:

homeostasis!

Explanation:

a baseball with a mass of 0.15 kg is moving at a speed of 40.0 m/s. What is the baseball's kinetic energy from this motion?

Answers

Answer:

The baseball's kinetic energy is 120 joules.

Explanation:

The kinetic energy is defined as:

[tex]k_{e} = \frac{1}{2}mv^{2}[/tex]  (1)

Where [tex]k_{e}[/tex] is the kinetic energy, m is the mass and v is the velocity.

The kinetic energy represents how much energy have an object as a consequence of its movement.

For the case of a baseball (m = 0.15 kg, v = 40.0 m/s):

[tex]k_{e} = \frac{1}{2}(0.15kg)(40.0m/s)^{2}[/tex]

[tex]k_{e} = 120 Kg.m^{2}/s^{2}[/tex]

But 1 j = [tex]kg.m^{2}/s^{2}[/tex]

[tex]k_{e} = 120 j[/tex]

Hence, baseball's kinetic energy is 120 joules.

Over a span of 6.0 seconds, a car changes its speed from 89 km/h to 37 km/h. What is its average acceleration in meters per second squared (m/s2)?

Answers

Answer: Average acceleration is -2.407 [tex]\frac{m}{s^{2}}[/tex]

 

Explanation:

Average acceleration is equal to change in velocity divided by time taken

therefore, [tex]a=\frac{Vf-Vi}{t}[/tex]

=> [tex]a=\frac{37-89}{6}\times \frac{5}{18}\frac{m}{s^{2}} = -2.407 \frac{m}{s^{2}}[/tex]

Raw data often appears in published scientific journals. Please select the best answer from the choices provided T F

Answers

Answer: The correct answer is False.

Explanation: The term "raw data" refers to the data that has not been processed or "clean" for use. A scientific journal is a type of publication that specializes in publishing new researches of the scientific field. These researches contain information, that is considered the end product of processing the raw data. It is most likely that raw data would not be used as it comes in published scientific articles.

Answer: It's false

Explanation:

I got it right on edge.

When does total internal reflection occur?

A. when the angle of incidence exceeds the angle of reflection

B. when the angle of incidence is less than the angle of reflection

C. when the angle of incidence is less than the critical angle

D. when the angle of incidence exceeds the critical angle

PLEASE GIVE A STRAIT ANSWER PLEASE

Answers

Answer:

A

Explanation:

I believe it is A because reflection is usually like a mirror or in water the other ones described are refraction or conversion. Hope this helps! :)

If a patient is receiving home care services this means they have a terminal illness true or false

Answers

False. Receiving home care services does not necessarily mean that a patient has a terminal illness.

Terminal illness and homecare services

Home care services are not exclusively for those with terminal illnesses; they cater to various needs.

These services extend beyond end-of-life care, encompassing chronic illness management, post-surgery recovery, palliative care, and support for the elderly.

Home care facilitates personalized healthcare delivery in the comfort of one's residence, promoting independence and enhancing the quality of life.

It is a flexible approach that addresses diverse medical conditions, allowing individuals to receive necessary assistance tailored to their unique health requirements.

Final answer:

Home care services do not exclusively mean a patient has a terminal illness. Home care can include hospice services for those with terminal illnesses, but it also caters to a range of other patient needs, such as recovery and long-term support. Hospice care provides comfort for terminally ill patients, often in their homes. The statement in the question is not true.

Explanation:

If a patient is receiving home care services, it does not necessarily mean they have a terminal illness. While it is true that hospice care is often associated with terminal illnesses and focuses on providing comfort and support rather than cure-oriented treatments, home care can encompass a variety of services for patients with varying needs, including recoveries from surgeries, chronic illnesses, disability support, and more community-based, long-term care. Hospice care, specifically, supports terminally ill patients and their families by offering pain management, emotional support, and the opportunity for the patient to be in the comfort of their own home. However, not all patients in home care are in hospice or have terminal illnesses.

Which of the three subatomic particles is responsible for determining the reactivity of an element?

Answers

Final answer:

The electron is the subatomic particle that determines an element's reactivity, with the configuration of the outermost or valence shell playing a key role in how readily an element undergoes chemical reactions.

Explanation:

The subatomic particle responsible for determining the reactivity of an element is the electron. The electrons in the outermost subshell, or valence shell, have the most significant interaction with other atoms, as they are farthest from the nucleus. An element is chemically reactive if its valence shell can easily accept or give up electrons. For instance, noble gases like helium and neon have a full valence shell and are very stable—they do not react easily due to their high ionization energies and unwillingness to accept an additional electron. On the other hand, elements like hydrogen have an incomplete valence shell, making them more reactive as they seek stability through reactions with other elements.

Which describes a reflected image in a plane mirror?

A. The image is upside-down and about as far away from the mirror as the reflected object.

B. The image is right-left reversed and about as far away from the mirror as the reflected object.

C. The image appears right side up and larger than the reflected object.

Answers

Answer:

B. The image is right-left reversed and about as far away from the mirror as the reflected object.

Explanation:

A plane mirror is used in several ways in our life, from the mirror that we have on the bathroom to the mirrors we use on cars, the main difference is that the mirror reflects the image reversed on the Vertical axis, which means that the left is the right and the right is the left, a mirror also protrays objects at a certain distance, about as far away from the mirror as the reflected object but they are actually closer in real life.

Answer:

B. The image is right-left reversed and about as far away from the mirror as the reflected object.

which of the following is an example of a main sequence star

Answers

The Sun.

I know this question is old but it still needed an answer :-) hope this helps anyone who needs it!

Which plate borders the Philippine plate
A African
B antártic
C Eurasian
D North American

Answers

The Philippine Sea plate is tectonically unusual in that almost all the boundaries are convergent.

The Pacific plate is subducting beneath the Philippine Sea plate to the east while the west/northwestern part of the Philippine Sea plate is subducting beneath the continental Eurasian plate.

Answer: Eurasian

Eurasian plate borders the Philippine plate. The correct option is C.

What is Philippine plate?

The Philippine Sea plate has all the boundaries convergent. It is a plate that lies below the lithosphere.

The Pacific plate is shifting beneath the Philippine Sea plate to the east. The west of the Philippine Sea plate is shifting beneath the continental Eurasian plate.

Thus, Eurasian plate borders the Philippine plate. The correct option is C.

Learn more about Philippine plate.

https://brainly.com/question/11519004

#SPJ2

All solids above 1000 K begin to emit radiation in what range on the electromagnetic scale?

radio
infrared
visible Light
ultraviolet

Answers

Answer:

Infrared

Explanation:

Wien's displacement law states that the peak wavelength of the radiation emitted by an object is given by

[tex]\lambda=\frac{b}{T}[/tex]

where

[tex]b=2.898\cdot 10^{-3} m\cdot K[/tex] is the Wien's displacement constant

T is the absolute temperature of the object

In this problem,

T = 1000 K

So the peak wavelength of the radiation emitted by the body is

[tex]\lambda=\frac{2.898\cdot 10^{-3} m\cdot K}{1000 K}=2.90\cdot 10^{-6} m = 2.90 \mu m[/tex]

And this corresponds to infrared radiation, whose range of wavelength is 700 nm - 1 mm.

Answer:

The correct answer is visible light.

Explanation:

How did the appearance of the smallest creatures, such as the microbes and bacteria, in Earth's early history impact the geosphere?

A)
formation of rocks


B)
enriching the soil


C)
decreased moisture


D)
caused land erosion

Answers

B) Enriching the soil.

Hope this helps.

I believe the answer is B) enriching the soil. Bacteria converts energy in would organic matter into forms useful to the rest of the organization in the soil food web.

whats the role of the suns gravity in the solar system

Answers

The suns gravity pulls on the planets and keeps them in place. Its gravitational pull puts them in orbit around the sun

The role of the sun's gravity is to keep the planets in place.

What is the sun's gravity?The Sun has multiple roles in every Earth's space operations.The Sun provides the gravitational force to the solar system. Its gravitational pull keeps all the planets in their respective orbits. Every planet that is revolving around the sun is due to its gravitational effect.The sun produces a lot of electromagnetic radiation and the sun's rays are full of radioactivity.And the solar wind from the sun can be used by spacecraft for mobility.

To learn more about the sun's gravity refer to:

https://brainly.com/question/7045923

#SPJ2

what type of test charge do we use for an electrical field ? ​

Answers

Answer:

A positive charge with very small charge compared to the charge source of the field

Explanation:

Let's consider an electric field produced by a source charge Q.

In order to test the direction and magnitude of the electric field, we use a positive test charge q. The reason for chosing a positive charge is that a positive charge will move following the directions of the electric field lines (in fact, the positive charge will be repelled from charge Q if charge Q is positive, so it will follow the electric field lines, which point away from the charge).

Moreover, the test charge q must be small compared to charge Q. This is because we don't want to modify significantly the configuration of the electric field, so the test charge q must be negligible compared to charge Q.

Identify the form of energy that matches each example. Energy from electromagnetic waves: Energy caused by changes in the structure of a nucleus: Energy resulting from movement and vibration of molecules: Energy an object has because of its position:

Answers

Final answer:

Electromagnetic waves carry energy in the form of photons. Nuclear energy is released during changes in the structure of a nucleus. Thermal energy is the result of movement and vibration of molecules. Potential energy is associated with an object's position.

Explanation:

Energy from electromagnetic waves: Electromagnetic waves, such as light, carry energy in the form of photons. These waves can be used to transfer energy and gather information. For example, sunlight carries energy from the sun to the Earth, which can be used for photosynthesis in plants.

Energy caused by changes in the structure of a nucleus: Nuclear energy is released when the structure of a nucleus changes, such as in nuclear fission or fusion reactions. This energy is used in nuclear power plants to generate electricity.

Energy resulting from movement and vibration of molecules: Thermal energy, also known as heat energy, is the energy resulting from the movement and vibration of molecules. It is a form of kinetic energy and is responsible for temperature changes and heat transfer.

Energy an object has because of its position: Potential energy is the energy an object possesses due to its position or condition. For example, a raised object has gravitational potential energy, and a compressed spring has elastic potential energy.

Learn more about Energy Forms here:

https://brainly.com/question/29471089

#SPJ12

Final answer:

The examples correspond to Radiant Energy (energy from electromagnetic waves), Nuclear Energy (energy caused by changes in a nucleus), Thermal Energy (energy resulting from movement and vibration of molecules), and Potential Energy (energy an object has because of its position).

Explanation:

For the given examples, the corresponding forms of energy are:

Energy from electromagnetic waves refers to Radiant Energy. Energy caused by changes in the structure of a nucleus refers to Nuclear Energy. Energy resulting from movement and vibration of molecules refers to Thermal Energy. Energy an object has because of its position refers to Potential Energy.

These are the major types of energy that correspond to the scenarios described in your question. Each of these forms plays a vital role in different physical and biological systems.

Learn more about Forms of Energy here:

https://brainly.com/question/29471089

#SPJ12

Decribe the relationship between kinetic energy and speed

Answers

Every moving object has kinetic energy.

The kinetic energy a moving object has is

(half of its mass)

multiplied by

(the square of its speed).

if Luke pushes with 22 N of force on the wagon that is now filled with bricks but he cannot make you move how much work did Luke do

Answers

Answer: He did none.

Explanation:

Even though he may have felt like he did work, none was done.

The only way for work to happen is if the object moves.

Answer:

Zero

Explanation:

Work done on an object is defined as the product of force applied on an object and the distance traveled by the object due to the applied force. here the force applied is in the direction of force.

Generally,

Work = force in the direction of displacement x displacement

Here, the displacement is zero

so, the work done by Luke to push the wagon is zero.

a rocket is fired vertically from the ground.it moves upwards with a constant acceleration 10m/s square for 30 seconds after which the fuel is finished.after what time from the instant of the firing of the rockets will attain maximum height?,find the maximum height it rraches above the ground and total time the rockrt will stay above the ground.​

Answers

Answer:

9090 m, 104 s

Explanation:

After the acceleration phase, the rocket reaches a height of:

x = x₀ + v₀ t + ½ at²

x = (0 m) + (0 m/s) (30 s) + ½ (10 m/s²) (30 s)²

x = 4500 m

And it reaches a velocity of:

v = at + v₀

v = (10 m/s²) (30 s) + (0 m/s)

v = 300 m/s

After the fuel runs out, the rocket goes into free fall.  The maximum height reached is:

v² = v₀² + 2a(x - x₀)

(0 m/s)² = (300 m/s)² + 2(-9.8 m/s²)(x - 4500 m)

x ≈ 9090 m

The time to reach maximum height during free fall:

v = at + v₀

0 m/s = (-9.8 m/s²) t + (300 m/s)

t ≈ 30.6 s

And the time to land from the maximum height:

x = x₀ + v₀ t + ½ at²

0 m = (9090 m) + (0 m/s) t + ½ (-9.8 m/s²) t²

t ≈ 43.1 s

So the total time is:

t = 30 s + 30.6 s + 43.1 s

t ≈ 104 seconds

A quality that has magnitude only is a

Answers

Answer:

scaler quantity has magnitude only for example mass ,speed,distance,electric current

The table shows data related to the planet Saturn. Which data is essential to find the length of a year on Saturn? ​

Answers

Answer:

period of orbit around sun ! thats a saturn year

Explanation:

An adiabatic process is performed on 15 moles of an ideal gas (γ = 1.44). What is the heat capacity at constant pressure for the gas? Let the ideal-gas constant R = 8.314 J/(mol • K).

25 J/(mol • K)

27 J/(mol • K)

31 J/(mol • K)

23 J/(mol • K)

29 J/(mol • K)

Answers

Answer:

27 J/(mol • K)

Explanation:

γ = Cp / Cv

We're given γ and we need to find Cp (heat capacity at constant pressure) per mole.  First we need to find Cv (heat capacity at constant volume).  Cv is defined as:

Cv = Cp − nR

where n is the number of moles and R is the ideal gas constant.

So:

γ = Cp / (Cp − nR)

γ (Cp − nR) = Cp

γ Cp − γnR = Cp

(γ − 1) Cp = γnR

Cp / n = γR / (γ − 1)

Given γ = 1.44 and R = 8.314 J/mol/K:

Cp / n = (1.44) (8.314 J/mol/K) / (1.44 − 1)

Cp / n = 27 J/mol/K

A blender with a total resistance of 6 ohms runs on a voltage of 190 volts. How much current does it use? NEED TO KNOW ASAP PLEASE HELPPPPP​

Answers

Hello!

The answer is 31.67 Amps.

Why?

To solve the problem, we need to use Ohm's Law equation, which states that:

[tex]V=IR[/tex]

Where,

V, is the voltage (in volts)

I, is the current (in Amps)

R, is the resistance (in Ohms)

We are given the following information:

[tex]Voltage=190v\\Resistance=6\Omega\\[/tex]

So, using Ohm's Law equation and substituting the given information, we have:

[tex]V=IR\\\\190v=I*6\Omega\\\\I=\frac{190v}{6\Omega}=31.67Amps[/tex]

Hence, we have that the current used by the blender is 31.67Amps.

Have a nice day!

Interference is an example of which aspect of electromagnetic radiation

Answers

Answer:

We experience interference while listening to the radio. A radio station works by sending and receiving radio waves. Since the radio waves are being interfered with other waves which must have a wave nature.

The interference is the net result of two individual waves. It can be constructive or destructive interference and is the property of waves and not particles.

This interference is an example of electromagnetic radiation. Thus we experience wave behavior of electromagnetic radiation in our daily communications.

Answer: wave behavior

Explanation:

the boundary between tectonic plates that are moving toward each other

Answers

Answer:

A divergent boundary is the answer

Explanation:

An object is traveling in a circular motion at constant speed. If the speed is doubled, the centripetal acceleration is changed by a factor of

Answers

Answer: the centripetal acceleration is changed by a factor of four

Explanation:  An object moving in a circular motion at constant speed has zero tangential acceleration but the direction of the tangential velocity vector changes as the object rotates. This change in direction of the tangential velocity vector results in centripetal acceleration ([tex]a_c[/tex]) given by

[tex]a_c=\frac{v^{2}}{r}[/tex]

where v=speed of object , r= radius of circular path

Thus if [tex]v_2=2v_1[/tex] then

[tex]a_2=\frac{v_2^{2}}{r_2}=\frac{(2v_1)^{2}}{r_1}=4\times \frac{v_1^{2}}{r_1}=4a_1[/tex]

Thus If the speed is doubled, the centripetal acceleration is changed by a factor of four .

Final answer:

The centripetal acceleration will increase by a factor of 4 when the speed of an object in circular motion is doubled, because centripetal acceleration is proportional to the square of the velocity.

Explanation:

An object is traveling in circular motion at constant speed. When the object's speed is doubled, its centripetal acceleration is affected significantly because the acceleration in circular motion is directly proportional to the square of the velocity. The formula for centripetal acceleration (ac) is ac = v² / r, where v is the speed of the object and r is the radius of the circular path.

Since the relationship is quadratic, if you double the speed (v becomes 2v), the new acceleration will become (2v)² / r = 4v² / r. This shows that the centripetal acceleration will increase by a factor of 4, which is the square of the factor by which the speed is increased.

Which best describes hooke’s equation?

Answers

Answer:

B.

The explanation of the relationship between load and extension is not in Hooke's Law.

Explanation:

Answer:

theory

Explanation:

I just took the test! hope this helps!


If the speed of an object is unchanging, then what must be true?




The object is traveling at an average speed.



The object is traveling at a constant speed.



The object is traveling at a decreasing velocity.



The object is traveling at an increasing velocity

Answers

Answer:

If the speed of an object is unchanging it means that it's traveling at a constant speed.

If the speed of the object increases or decreases it means that the speed is changing. That's why those options are not valid.

The average speed implies that the speed changes over time, but just the average remains the same. That's why this option is not valid.

If the speed of an object is unchanging, then the object is traveling at a constant speed.

"Unchanging" and "constant" mean the same thing.

Other Questions
Please help with question 5! Use the graph to write the factorization of x^2+2x-8 Which pattern folds into the triangular prism above? Choisis le meilleur pronom..Dans la voiture? Oui, je leur ____ ai parl.ylelesla During the Renaissance there was renewed interest in:A. Italian culture.B. ancient Egyptian culture.C. French culture. D. ancient Greek and Roman culture Lastly, behavioral evidence indicates that relativism permeates our society whereby we use our business ethics' in business, our family ethics' at home or our global ethics' with other cultures, etc. explain the flaws in this approach to being good. in other words, are there really business ethics' or just ethics'? explain in detail For a group experiment, your science class measured the fine-particulate concentrations in the air at random places around campus, and estimated a sample average of 22 g/m3 (micrograms per cubic meter). If 144 readings were taken, and the standard deviation of the sample measurements was 4 g/m3, you are 99.7% confident that actual concentration of fine particulates at the school is What light color passes through the atmosphere and refracts toward the moon? A. Orange B. Blue C. Red D. Green You scoop up a water sample from a local pond nearby, because you are curious about the possible microbes that might live there. After looking at several slides that held drops of the sample, you noticed two different kinds of cells: One kind was very small and had no separate internal structures; the other kind was much larger, and it contained several kinds of internal structures that were physically different from each other. Please name each cell and briefly describe their overall similarities and differences. NEED HELP ASAP PLEASE ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~The mass of cobalt-60 in a sample decreased from 0.800g to 0.200g over a period of 10.5 years. From this information, calculate the half-life of cobalt-60. Adult tickets for the game cost $4 each and student tickets cost $3 each. A total of 105 tickets worth $380 were sold. How many student tickets were sold? Can someone please help me with these? SIS is a group that has a clear political objective. It wants to rid the Middle East of Western values and modern laws and bring back a way of life that it considers authentically . It wants to erase national borders of the Middle East and unite all Muslim-dominated nations under a where Sharia will be imposed and respected. Find the system determinant of the given matrix. -30 -6 6 30 Which best describes the March on Washington for Jobs and Freedom?It was attended by only a few thousand people.It was attended mostly by white Americans.It was chaotic and violent.It was organized and peaceful. in photography what wavelengths do we perceive as dark purple violet? 3(4x+2)-6x=5x-5(2+x) please solve show your work do not solve for x Note the wording of the protesting guidelines. What word choices create a tone of reasons and control? How might this tone affect readers? Which year was DNA evidence introduced?1908198819801998 The word inaction contains the prefix in- which means not. Which of these words contains the same prefix?A)inningB)interestC)interfereD)invisible Steam Workshop Downloader