An element that is malleable and a good condcutor of heat and electricity could habe an atomic number of

is there more

to the senteance

it just cuts off

Periodic trends include the atomic radius, which decreases across a period and increases down a group; electronegativity, which increases across a period and decreases down a group; and ionization energy, which increases across a period and decreases down a group.

Periodic Trends: Atomic Radius, Electronegativity, and Ionization Energy

The periodic table is organized in such a way that certain properties of elements show predictable trends. These periodic trends include atomic radius, electronegativity, and ionization energy.

Atomic Radius

The atomic radius is the size of an atom. It generally decreases from left to right across a period due to the increase in the number of protons, which pulls the electrons closer to the nucleus. Conversely, the atomic radius generally increases from top to bottom within a group, as additional electron shells are added, making the atom larger.

Electronegativity

Electronegativity is an atom's ability to attract electrons. It generally increases from left to right across a period because atoms are more effective at attracting electrons due to their increased nuclear charge. In contrast, electronegativity decreases going down a group because the increased distance from the nucleus and the shielding effect make it harder to attract electrons.

Ionization Energy

Ionization energy is the energy required to remove an electron from an atom in its gaseous state. This energy increases from left to right across a period owing to stronger attraction between the nucleus and electrons. However, ionization energy decreases from top to bottom in a group because outer electrons are farther from the nucleus and more shielded by inner electrons, requiring less energy to remove them.

These periodic trends are critical for understanding elemental behavior and predicting chemical reactions.

I believe this problem have these following choices:

5,000 cal

0.05 cal

5 x 10^3 cal

5 x 10 ^4 cal

Now 1 kilocalorie  = 1000 calories, therefore:

50 kilocalories * (1000 calories / 1 kilocalorie) = 50,000 calories

Since there are 4 zeroes, so the scientific notation is:

5 x 10 ^4 cal         (ANSWER)

The volume of the object is 23.06 cm³

We have an object of given mass and density.

We have to calculate the volume of this object.

The following relation exists between mass and density -

m = d x v

d - density of body

m - mass of body

v - volume of body

According to the question -

m = d x v

Rewrite the relation as follows -

v = m/d

Substitute the values -

v = 455.6 / 19.3 = 23.06 cm³.

Hence, the volume of the object is 23.06 cm³.

To solve more questions on Mass - Density relation, visit the link below-

brainly.com/question/28348989

#SPJ2

The atomic mass of the atom with 104 protons and 157 neutrons has been 261 amu.

An atom has been consisted of the positively charged nucleus and the negatively charged electrons revolving around the nucleus. The nucleus has been consisted of neutrons and protons.

The transfer of electrons between the atoms impart charge to the atom and helps in the reactivity of the atom. The atomic mass in an atom has been the mass of the nucleus. It has been a constant quantity in an atom.

Since the atomic mass has been the mass of the nucleus:

Atomic mass = Neutrons + Protons

Atomic mass = 157 + 104

Atomic mass = 261 amu

The atomic mass of the atom with 104 protons and 157 neutrons has been 261 amu.

For more information about atomic mass, refer to the link:

https://brainly.com/question/11673503

The correct answer would be freezing point. The other three would not be the answer because fammability, ph, and toxicity are all examples of chemical properties.

Answer:

Physical property is density.

Explanation:

This check needs precision. Gold is a dense metal, 19.32 grams per cubic centimeter. For that you have to calculate the density, weighing the piece on a scale, then you would fill a test tube with water and introduce the piece and note how much the water has risen. Density is defined as the mass divided by the displaced volume. If the result you get is close to 19 it will be a 24-karat gold piece.

Answer:If the calorimeter decreases in temperature over the course of the reaction:

[tex]Q_{rxn}=Positive[/tex]

[tex]Q_{cal}=Negative[/tex](heat is lost by the caloriemter)

Explanation:

Whenever reaction takes place in calorimeter tone out of two things can a happen:

1. If the temperature of calorimeter increases: During a reaction when heat is released in the calorimter. This heat released is then absorbed by the calorimeter (Law of Conservation of Energy) which results in increase in temperature of calorimeter.

Those reaction which add on heat to their surrounding are termed as Exothermic reaction.

[tex]Q_{rxn}=Negative[/tex]

[tex]Q_{cal}=Positive[/tex] (Heat gained by the calorimeter)

2. If the temperature of calorimeter decreases: During a reaction when heat is lost from the calorimter. This heat loss is due to the absorption of heat by reactants during the reaction (Law of Conservation of Energy) which results in decrease in temperature of calorimeter.

Those reaction which absorbs heat from their surrounding are termed as Endothermic reaction.

[tex]Q_{rxn}=Positive[/tex]

[tex]Q_{cal}=Negative[/tex](heat is lost by the caloriemter)

Final answer:

The major functional groups for biomolecules include hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl. Examples of compounds where these functional groups are found include carbohydrates, amino acids, and organic acids.

Explanation:

The major functional groups for biomolecules include hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl. These functional groups confer specific chemical properties to molecules bearing them.

For example, hydroxyl groups (-OH) are found in carbohydrates, alcohols, and many other organic compounds. Amino groups (-NH2) are found in amino acids, the building blocks of proteins. Carboxyl groups (-COOH) are found in organic acids, such as fatty acids.

Carbohydrates are formed by dehydration synthesis, a process in which monomers bind together by combining their functional groups and generating water molecules as byproducts.

Answer:

C - Variable

Explanation:

Let’s see all the options in detail.

Apparatus: These are the equipment’s used in the experiment. Irrespective of the experiment result, the apparatus remains unchanged from start till the end.

Constant: These are factors that are fixed and does not change throughout the experiment.

Variable: A variable is any factor in an experiment that changes. As per dictionary, variable literally means something that varies i.e. change.  

Hypothesis: This is the underlying explanation in response to which the experiment is being conducted. Also, in an experiment, the hypothesis is not considered a factor at all.

Therefore, the correct answer is C.

The electron configuration of copper cation:

₂₉Cu²⁺ 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁹ or [Ar] 3d⁹.

The electron configuration of copper cation:

₄₇Ag⁺ 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ or [Kr] 4d¹⁰.

Copper and silver lose their outer s-orbital electrons before they lose their outer d-orbital electrons.

Each electron configuration is consistent with the color, copper solution is blue, silver solution is colorless.

The electron configuration of Cu²⁺ is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁹. The electron configuration of Ag⁺ is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰.

The observed color of Cu²⁺ is typically blue, while the observed color of Ag⁺ is colorless. The electron configurations of these cations are consistent with their observed colors.

Electronic configuration refers to the arrangement of electrons in an atom, ion, or molecule. It describes the distribution of electrons among different energy levels, orbitals, and subshells within an atom or ion.

The electronic configuration is represented using a notation that indicates the energy levels (principle quantum numbers), subshells (s, p, d, f), and the number of electrons in each subshell. The Aufbau principle, Pauli exclusion principle, and Hund's rule are used to determine the order of filling the orbitals and the spin states of the electrons.

Cu²⁺ has an incomplete d-orbital with 9 electrons, which gives rise to a blue color due to the absorption of light in the visible spectrum. The absorption of light corresponds to the promotion of an electron from a lower energy d-orbital to a higher energy level.

On the other hand, Ag⁺ has a fully filled d-orbital with 10 electrons, which does not result in the absorption of visible light. As a result, Ag⁺ appears colorless.

The observed colors of Cu²⁺ and Ag⁺ ions are a result of the electronic configuration and the interaction of light with the d-electrons in the transition metals.

Learn more about Electronic configuration, here:

https://brainly.com/question/31812229

#SPJ6

A Hydrogen atom only contains a single electron (1 e). Therefore for this atom, the quantum number which determines the energy of an electron is best represented only by the principal quantum number. The principal quantum number has a symbol of n.

Answer:

n

Each enzyme has an optimum pH level at which it shows its highest activity. Below or above this pH, the activity level probably decreases.

Enzymes are biological catalysts in living bodies. There are thousands of individual enzymes present in human body itself. Each enzymes are having their specific functions.

Enzymes have a pocket like receptor structure on which the substrate can attach. Hence enzymes provide a perfect platform for a chemical reaction. Each enzymes has an optimum pH and temperature at which it can shows it highest activity.

For example, the enzyme pepsin functions in digestion in humans works at a pH of 2. Similarly the enzyme amylase will be active only at pH around 7. This way, enzymes activity is significantly dependent on the pH.

Find more on enzymes:

https://brainly.com/question/14953274

#SPJ6

To prepare 250 mL of a 0.235 M solution of KCL, you would need roughly 4.38 grams of solid KCl. This is calculated using the formula for molarity, converting volume in ml to liters, and then using the molar mass of KCl to convert moles to grams.

The task is to find out how many grams of solid KCl are needed to prepare 250 mL of 0.235 M solution. This is a question about molarity, which is a measure of the concentration of a solute in a solution.

Start by knowing that molarity (M) is defined as moles of solute per liter of solution. Hence, we can calculate the moles of KCl needed using the formula: moles = Molarity * Volume (in liters). In this case, the volume in litres is 250 mL / 1000 = 0.250 L.

Moles of KCl = Molarity * Volume

Moles of KCl = 0.235 M * 0.250 L = 0.05875 mol

Now to convert moles to grams, we use the molar mass of KCl, which is approximately 74.55 g/mol.

Mass of KCl = Moles * Molar mass

Mass of KCl = 0.05875 mol * 74.55 g/mol = approximately 4.38 g

So, you would need around 4.38 grams of solid KCl to prepare 250 mL of a 0.235 M solution.

https://brainly.com/question/8732513

#SPJ12

To prepare 250 mL of a 0.235 M solution of KCl, you need a. 4.38 grams of KCl.

To prepare 250 mL of a 0.235 M solution of KCl, you need 4.38 grams of KCl.

The formula to find moles is:

Given:

First, calculate the moles of KCl:

Next, convert the moles of KCl to grams using the molar mass of KCl.

Calculate the grams of KCl:

Therefore, to prepare 250 mL of a 0.235 M solution of KCl, you need 4.38 grams of KCl.

Correct question is: How many grams of solid kcl are needed to prepare 250 ml of 0.235 m solution?

a. 4.38 g

b. 5.67 g

c. 3.67 g

d. 2.78 g

Answer: Option (D) is the correct answer.

Explanation:

Water table is defined as the upper most level of water that is present under the ground surface where there is permanent separation of soil or rocks with water.

Water table is maintained through a natural process as when it rains then the rain water seeps through the ground and reaches below the ground.

Water table is also known as ground water table.

Therefore, we can conclude that the water table is the upper surface of underground water.