Final answer:
To calculate the grams of NiCO3 formed, the moles of Na2CO3 used are first calculated, then converted to moles of NiCO3 using the stoichiometry of the reaction, and finally, the mass of NiCO3 is found by multiplying its moles by its molar mass, resulting in 0.324 g of NiCO3.
Explanation:
To find out how many grams of NiCO3 will be formed, we first need to write the balanced chemical equation for the reaction between NiCl2 and Na2CO3.
However, the provided question does not specify the exact reaction formula; typically, such a reaction would produce NiCO3 and NaCl. Assuming a reaction of the form NiCl2 + Na2CO3 → NiCO3 + 2 NaCl, and that NiCl2 reacts completely with Na2CO3, the next step is to calculate moles of Na2CO3 since its volume and molarity are given (14.3 mL of 0.191 M).
Moles of Na2CO3 = Volume (L) * Molarity = 0.0143 L * 0.191 mol/L = 0.00273 mol. Since the reaction is in a 1:1 molar ratio, the moles of NiCO3 produced will also be 0.00273 mol. To find the mass of NiCO3 formed, multiply the moles by the molar mass of NiCO3 (approximately 118.7 g/mol).
Mass of NiCO3 = Moles * Molar mass = 0.00273 mol * 118.7 g/mol = 0.324 g (rounded to three significant figures).
Which of the following statements best describes the Aufbau principle?
which mineral is the major component of dryall
A 50 g sample of iron reacts with 21 g of oxygen to form how many grams of iron oxide?
Final answer:
To calculate the grams of iron oxide formed, you need to calculate the moles of iron and moles of oxygen in the reaction and use the mole ratio from the balanced chemical equation. From the given information, the moles of iron and oxygen are 0.894 mol and 1.3125 mol, respectively. Using the mole ratio of 4 moles of iron to 2 moles of iron oxide, we can calculate that 0.447 mol of iron oxide is formed. Finally, converting moles to grams, we find that 71.26 g of iron oxide is produced.
Explanation:
To determine the grams of iron oxide formed, you need to calculate the moles of iron and moles of oxygen in the reaction and use the balanced chemical equation to determine the mole ratio. From the given information, the molar mass of iron is 55.845 g/mol and the molar mass of oxygen is 16.00 g/mol. The balanced chemical equation for the reaction is:
4Fe + 3O₂ → 2Fe₂O₃
Using stoichiometry, we can calculate the moles of iron and oxygen:
Moles of iron = (50 g iron) / (55.845 g/mol) = 0.894 mol
Moles of oxygen = (21 g oxygen) / (16.00 g/mol) = 1.3125 mol
From the balanced chemical equation, we can see that the mole ratio of iron to iron oxide is 4:2. Therefore, for every 4 moles of iron, we get 2 moles of iron oxide. So, the moles of iron oxide formed in the reaction is:
Moles of iron oxide = (0.894 mol iron) / (4 mol iron) * (2 mol iron oxide) = 0.447 mol iron oxide
Finally, we can calculate the grams of iron oxide:
Grams of iron oxide = (0.447 mol iron oxide) * (159.69 g/mol) = 71.26 g iron oxide
Which combination will produce a precipitate? agno3 (aq) and ca(c2h3o2)2 (aq) naoh (aq) and hcl (aq) nacl (aq) and hc2h3o2 (aq) nh4oh (aq) and hcl (aq) fe(no3)2 (aq) and koh (aq)?
Final answer:
The combination of Fe(NO3)2 (aq) and KOH (aq) is the one that will produce a precipitate, as Fe(OH)2 is generally insoluble in water.
Explanation:
To determine which combination will produce a precipitate, we need to consider the solubility rules and look for a product in each reaction that forms an insoluble solid, known as a precipitate. We can predict precipitate formation by looking at possible products of a double displacement reaction and referencing a solubility chart.
Analysis of Combinations
AgNO3 (aq) and Ca(C2H3O2)2 (aq): No precipitate is expected because all nitrates (NO3-) and acetates (C2H3O2-) are soluble.
NaOH (aq) and HCl (aq): No precipitate forms, instead, you get NaCl (aqueous) and water (H2O).
NaCl (aq) and HC2H3O2 (aq): Again, no precipitate is expected because all chlorides (except those with Ag+, Pb2+, Hg2 2+) are soluble, as are all acetates.
NH4OH (aq) and HCl (aq): This combination results in the formation of NH4Cl (aqueous) and water, so no precipitate forms here either.
Fe(NO3)2 (aq) and KOH (aq): This combination will likely result in an insoluble hydroxide precipitate, specifically Fe(OH)2.
Based on this analysis, the combination that will produce a precipitate is Fe(NO3)2 (aq) and KOH (aq), as iron(II) hydroxide is generally insoluble in water.
The combination of B. NaOH and Fe(NO₃)₃ will produce a precipitate of Fe(OH)₃.
Other combinations either do not react or form soluble products.
To determine which combination of solutions will produce a precipitate, we can use solubility rules. Let's analyze each option:
Option A: AgNO₃ (aq) and Ca(C₂H₃O₂) (aq)Therefore, the correct answer is option B, where the reaction produces the precipitate Fe(OH)₃.
Correct question is: Which combination will produce a precipitate?
A. AgNO₃ (aq) and Ca(C₂H₃O₂) (aq)
B. NaOH (aq) and Fe(NO₃)₃ (aq)
C. NaCl (aq) and HC₂H₃O₂ (aq)
D. NH₄OH (aq) and HCl (aq)
E. NaOH (aq) and HCl (aq)
What process uses atomic particles of carbon and uranium to determine exact age?
Answer:
Radioactive dating
Explanation:
How do the valence electron configurations of alkali metals compared with each other?
Magnesium metal reacts with iodine gas at high temperatures to form magnesium iodide. what mass of mgi2 can be produced from the reaction of 5.15 g mg and 50.0 g i2
To find the mass of MgI2 produced in the reaction between Mg and I2, you need to calculate the moles of Mg and I2 and use the mole ratio from the balanced equation. Finally, convert the moles of MgI2 to grams using the molar mass of MgI2.
Explanation:In this reaction, the balanced equation is 2Mg + I2 → 2MgI2. From the balanced equation, we can see that 2 moles of Mg react with 1 mole of I2 to produce 2 moles of MgI2. To find the mass of MgI2 produced, we need to calculate the moles of Mg and I2 and then use the mole ratio to determine the moles of MgI2. Finally, we can convert the moles of MgI2 to grams using the molar mass of MgI2.
Given: m(Mg) = 5.15 g, m(I2) = 50.0 g
Molar mass of MgI2 = 278.113 g/mol
Calculate the moles of Mg using the formula: moles = mass/molar massCalculate the moles of I2 using the same formulaFrom the balanced equation, the mole ratio between Mg and MgI2 is 2:2, so the moles of MgI2 will be the same as the moles of MgConvert the moles of MgI2 to grams using the formula: mass = moles x molar massUsing these steps, you can determine the mass of MgI2 that can be produced from the given masses of Mg and I2.
In the periodic table of elements, what do all of the elements in group 2 have in common?
A) An atom of each element can hold up to eight electrons in its outer energy level.
B) An atom of each element can hold up to six electrons in its outer energy level.
C) Each element is an alkaline earth metal.
D) Each element is a halogen.
E) Each element is dull, brittle, and breaks easily.
Answer:
C
Explanation:
All elements in Group 2 of the periodic table are characterized as alkaline earth metals. They share the common characteristic of having two valence electrons in their outermost energy level. These elements tend to lose these electrons to reach stability, making them typically reactive.
Explanation:In the periodic table, all elements in Group 2 have some key similarities. The most significant common characteristic is that each element in this group is an alkaline earth metal. This means that they have two valence electrons in their outermost energy level. They tend to lose these two electrons to reach a stable state, so they are typically reactive.
It is incorrect to say that an atom of each element can hold up to eight or six electrons in its outer energy level. This description fits more with Group 16 and Group 18 elements, respectively. Also, these elements are not halogens (Group 17 elements), which have seven valence electrons, nor are they necessarily dull, brittle, or break easily, as these are generally more descriptive of non-metals than metals.
Learn more about Group 2 Elements here:https://brainly.com/question/33626483
#SPJ5
It is thought that long-term memory never can get filled up. the term used to describe the capacity of long-term memory is ________.
Final answer:
The term used to describe the capacity of long-term memory is 'unlimited' or 'limitless' due to its potentially infinite capacity for storing information for extended periods.
Explanation:
The term used to describe the capacity of long-term memory is unlimited or limitless. Long-term memory (LTM) is a type of memory storage that can hold information for extended periods, ranging from days to years. Long-term memory differs from short-term memory in that it possesses a potentially infinite capacity; there is no known limit to what we can remember. Although the ability to retrieve information from LTM can be affected by various factors, such as consolidation and interference, the storage capacity itself is considered vast.
What is the name for the most abundant chemical sedimentary rock? what mineral is it made of? what is the chemical formula for that mineral?
Limestone is the most prevalent type of chemical sedimentary rock. Calcite, also known as calcium carbonate, is the main component of limestone and has the chemical formula CaCO3.
What is a sedimentary rock?The formation of sedimentary rocks involves the accumulation or deposition of mineral or organic particles at the Earth's surface, followed by cementation. The processes that lead to the accumulation of these particles are collectively referred to as sedimentation.
Clastic, organic (biological), and chemical sedimentary rocks are the three different types of sedimentary rocks. Sandstone is a type of clast sedimentary rock, which is formed from fragments of other rocks.
Learn more about sedimentary rock here:
https://brainly.com/question/7437433
#SPJ6
Electrons have almost no mass. True False
TRUE is the perfect answer
To find the number of neutrons in an atom, subtract its _____.
Explanation:
It is known that an atom consists of protons, neutrons and electrons. Both protons and neutrons are located inside the nucleus of an atom whereas electrons revolve around the nucleus.
Atomic number is the total number of protons present in an atom. On the other hand, atomic mass is the sum of total number of protons and neutrons present in an atom.
That is, Atomic mass = no. of protons + no. of neutrons
no. of neutrons = atomic mass - no. of protons
Therefore, we can conclude that to find the number of neutrons in an atom, subtract its number of protons from atomic mass.
Which two ions will MOST LIKELY bond? A. bromine ion and iodine ion B. lithium ion and chlorine ion C. sodium ion and potassium ion D. calcium ion and magnesium ion
Final answer:
Sodium ion and potassium ion are the two ions that are most likely to bond due to their positive charges.
Explanation:
The two ions that are most likely to bond are sodium ion and potassium ion. Both sodium and potassium are alkali metals in Group 1 of the periodic table and have a single electron in their outermost energy level. When they lose this electron, they form positively charged ions (cations). Since sodium has a +1 charge and potassium has a +1 charge, these ions are attracted to each other through electrostatic forces, forming a bond.
An atom of aluminum with a mass number of 24 and an atomic number of 13 has a total of
An atom of aluminum with a mass number of 26 and an atomic number of 13 has a total of 13 protons and electrons and 13 neutrons.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ2
Write a balanced equation for the formation of one mole of nacl(aq) from its elements
A balanced equation for the formation of one mole of NaCl (aq) from its elements is [tex]\rm2Na + Cl_2 \rightarrow 2NaCl[/tex].
What are elements?Elements are defined as a substance that is entirely made up of the same kind of atoms, all of which have the same amount of protons in their nuclei. Every element has characteristics. Conductivity, magnetism, melting and boiling points, color, state of matter, and other characteristics are among these. The periodic table of elements is divided into sections, each of which contains groups of elements having related properties.
Balanced equation is defined as a chemical equation where the amount of each element's atoms on each side of the equation is equal and the mass is preserved. The law of conservation of mass stipulates that mass cannot be generated or destroyed, hence a chemical equation must always be in balance.
Thus, a balanced equation for the formation of one mole of NaCl (aq) from its elements is [tex]\rm2Na + Cl_2 \rightarrow 2NaCl[/tex].
To learn more about elements, refer to the link below:
https://brainly.com/question/13025901
#SPJ2
The force of gravity pulls all objects downwards." which of these statements is correct about the law of science?
a.it is not supported by observations.
b.it can be contradicted by valid data.
c.it requires no further experimentation. or
d.it it a description in nature that will continue to change.
The correct statement about the law of gravity is that it can be contradicted by valid data. Newton's law of gravitation, which has been expanded upon by Einstein's Theory of General Relativity, remains a well-tested hypothesis, and scientific laws are subject to ongoing testing and revision.
The force of gravity is a fundamental principle in physics, described by Newton's law of gravitation, which states there is a force of attraction between masses. This law is supported by copious observations and is considered a scientific law because it consistently describes what happens under certain conditions in nature.
When evaluating the statement, "The force of gravity pulls all objects downwards," the correct choice would be option b, as scientific laws can be contradicted by new, valid data, which may lead to their modification or replacement.
For instance, Albert Einstein's Theory of General Relativity provided new insights into gravity that go beyond Newton's law, particularly in extreme conditions involving massive objects like the sun. Additionally, all scientific laws, including the law of gravity, are subject to continued examination and testing; they are well-tested hypotheses rather than absolute truths. To help understand this concept, one can perform a take-home experiment by dropping objects of different masses from the same height to observe that they hit the ground simultaneously, which is a demonstration of Galileo's observation that all masses fall with the same acceleration, explained by the law of gravitation.
the waste product of photosynthesis is: carbon, oxygen, nitrogen, carbon dioxide
13. What is the difference between a solution and a heterogeneous mixture? Give an example of
each.
(4 points)
Answer:
The macroscopic appearance is different.
Explanation:
The two (solution) and heterogeneous mixture are actually mixtures. These are made up of one of two pure substances in gaseous and liquid phases.
However, the difference lies in the macroscopic level of the particles.
A heterogeneous mixture is made of different substances. For example, when powdered milk is added to water, the mixture is a white substance, or colloidal mixture. The mixture is a heterogeneous in the sense that is all liquid; however, the mixture is not the same color as water. Thus, there is not complete dissolution.
A solution is the same throughout. An example is dissolving sugar into water. The solution is colorless throughout. The difference is that the sugar and water have formed a solution whose properties are not visible to the naked eye.
Living things transform kinetic energy into potential chemical energy in the
In which orbital does an electron in a copper atom experience the greatest effective nuclear charge?
When balancing a chemical equation, the number of h atoms in 2 ch4 is eight?
Which of the following elements is represented by the orbital diagram?
Select one:
a. Phosphorus
b. Sulfur
c. Aluminum
d. None of these; this is an incorrect orbital diagram
Which property of isotopes makes them suitable for determining the dates of ancient artifacts? atomic number of the isotope rate of decay of the isotope radiation from the isotope stable nature of the isotope
An element whose atoms have the electron configurations 2-8-18-1?
The element with electron configuration 2-8-18-1 is potassium (K), which is in the first column of the s-block of the periodic table and has an atomic number of 19.
Explanation:An element whose atoms have the electron configuration 2-8-18-1 is likely a member of the alkali metals which reside in the first column of the s-block. The mentioned configuration suggests that this element has 29 electrons. Referring to the periodic table and electron configurations chart, we can determine that the element with this configuration is potassium (K), which has an atomic number of 19. Potassium typically has the electron configuration of 1s² 2s² 2p¶ 3s² 3p¶ 4s¹, which is the same as having the configuration 2-8-8-1 when considering each shell's capacity without specifying subshell orbitals.
hey help me please :)
What is a possible pH of acid rain?
7.0
6.9
4.3
10.5
the answer is 4.3.....
The specific heat of silver (ag) is 0.245 j/ºc g. determine the energy required to raise the temperature of 350 g of ag from 293 k to 400 k.
Specific heat equation is given as
[tex]Q =m\times c\times \Delta T[/tex]
where, Q = energy required
m = mass
c = specific heat
[tex]\Delta T[/tex] = change in temperature
Specific heat of silver ([tex]Ag[/tex]) is [tex]0.245 J/^{o}C g[/tex]
Mass of silver = 350 g
[tex]\Delta T =T_{final}-T_{intital}[/tex]
Convert 400 K to degree Celsius = 400-273 = 127 K
Convert 293 K to degree Celsius = 293-273 = 20 K
Thus, [tex]\Delta T =127 K-20 K[/tex]
= [tex]107^{o}C[/tex]
Put the values,
[tex]Q =m\times c\times \Delta T[/tex]
[tex]Q = 350 g\times 0.245 J/^{o}C g\times(107^{o}C)[/tex]
= 9175.25 J
Hence, energy required to raise the temperature is 9175.25 J
Part
b.1. eliseo couldn't find the 6 m hcl and so used 6 m hno3 for testing the metals instead. his logic? both are strong acids. explain how the results of the experiment would have been different.
mars is 1.52 au from the sun . about how many kilometers is mars from the sun
Final answer:
Mars is approximately 227.5 million kilometers from the Sun.
Explanation:
Mars is approximately 1.52 astronomical units (AU) from the Sun. Given that the average distance between the Earth and the Sun is about 149.6 million kilometers, we can calculate the distance from Mars to the Sun. Since 1 AU is equivalent to about 149.6 million kilometers, we can multiply 1.52 AU by 149.6 million kilometers to find that Mars is approximately 227.5 million kilometers from the Sun.
Would it make a difference if calcium bromide solution, cabr2, were used rather than sodium bromide solution?
Which of the following elements is a gas at room temperature?
fluorine (F)
sulfur (S)
mercury (Hg)
iodine (I)